Twin Cam & M8 Discrete Head Breather System Touring Softail Dyna

Discrete & Flexible Breather System

For

Harley-Davidson

FITS ALL TWIN CAM & MILWAUKEE-EIGHT MODELS

DK Custom Products

FEATURES & SPECS:

• Fits almost All Air Cleaner Systems
• Allows Discrete Placement of the supplied filter
• Chrome Washable Reuseable Filter - flexible placement
  
• Includes 6 feet of hose for maximum flexibility in filter placement
• Uses Your OEM Breather Bolts with Nipples (not included)
• All needed hardware
• Turn-Key System

In the picture below you can see one of many different places you can affix the filter.  Please look at the additional pictures at the bottom to see how discrete this external breather system is.

An external Breather Kit is preferred with any Air Cleaner System.  This allows for only clean cool air to go into the air cleaner and engine, increasing performance and engine longevity.  This kit will work with the OUTLAW HiFlow 587 & 425 Air Cleaners and many other aftermarket Stage 1 Air Cleaners*.  It can even be used with the stock air cleaner.

The EPA has required Harley to route hot, dirty, oily crankcase air back into the air cleaner compromising the performance of your engine. This vents it without compromising the performance and longevity of your motor.

Caution:  Motorcycles modified with this DK Custom Products High-Performance part may not be legal for public highway use in some areas.  The user shall determine suitability of this product for his or her use.

With this breather system you will experience a slight performance increase.  This is because engines like Cold Dry air!

You can also use a hose to route directly to the ground.

E-Z Install

Fits All Twin Cam & Milwaukee-Eight Models - 2000-Up Touring & Softail, 1999-Up Dyna

This kit will work with the All the OUTLAW HiFlow Air Cleaners, and most other aftermarket Stage 1 Air Cleaners*.  It can even be used with the stock air cleaner if it uses the OEM breather bolts with nipples.

*If your air cleaner system will accept the Stock OEM breather bolts with nipples, then this breather kit will allow you to route the hot oily air to the supplied Filter that you can place anywhere you like. 

*If your air cleaner system will accept the Stock OEM breather bolts, then this breather kit will allow you to route the hot oily air to the supplied filter that you can place anywhere you like.  Will also work with any air cleaner system that has breather bolts with a nipple on the end to accept the supplied hose.

Filter may, or may not, have a small loop in it.  This does not affect the aesthetics or installation choices. 

 EXAMPLE:

Larry’s Discrete Head Breather System on 2015 Tri-Glide with Rushmore A/C with the Stock Cover

(also used a Vented Chrome Catch-Can)

Hope this will help someone else with their installation.

The pictures are as follows:

#1 - K&N air filter with nylon plug in hole where stock hose was.

#2 -  Stock hoses connected to hoses in kit, and exiting bottom of air filter housing through hole I had to drill.

#3 - Hose running on top of cam cover. ( I put a piece of split nylon wire wrap over rubber hose to protect it from heat and rubbing )

#4 - Hose routed on left side of oil pressure switch.

#5 - Hose routed on left side of rear brake control cylinder.

#6 - Hose coming straight down and secured with wire tie. Catch can is very secure and easy to access.

#7 Air filter installed. There is plenty of room for it and the breather hoses. Works great, and I think it looks fairly good.

 Breather Installation Instructions

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.