Description
The Go Cruise Throttle Control has been re-engineered for improved performance. It looks simple, but Go Cruise was designed by a structural engineer, using advanced programming, to evenly spread out stress throughout the structure. Now proprietary polymer blend material and revised architecture give the new generation Go Cruise increases grip, strength and durability. Lightweight, strong and flexible, Go Cruise leads the market in throttle controls. Get yours today!
The new Go Cruise throttle control is an amazingly clever, simple and brilliant solution to relieving stress on your wrist on long rides, and is the least expensive "Cruise Control" for motorcycles on the market!
Go Cruise installs on your throttle grip in a few seconds, no tools needed. When you're at your desired speed, push the Go Cruise down with your index finger until it rests on your brake lever. Go Cruise has just enough grip to hold your throttle in place and take stress off your wrist. To reduce speed, simply roll the throttle off manually to override the Go Cruise.
Choose between 7/8" or 1" sizing ( 7/8" is for almost all metric bars, 1" for HD )
-
One of the best on the market
-
Easy to use - on/off in 6 seconds -
Design for the original stock RUBBER grip -
22 mm (Small, 7/8" Dia. Handlebar size) for urban and sport bikes -
25 mm (Large, 1" Dia. Handlebar size) for Harley Davidson or cruisers -
Super EZ to install, no tool required
Improper installation and/or use of the throttle control could result in serious injury or death,
as is the case with any other motorcycle specific part or accessory.
2. DO NOT use in traffic.
3. DO NOT use in congested residential or urban areas.
4. DO NOT use when precise speed changes are required.
5. DO NOT use if you are an inexperienced rider.
6. DO NOT use with any other cruise control device.
7. DO NOT use until you are thoroughly familiar with the operation of the throttle control.
8. Disengage Go Cruise Throttle Control in downhill.
Each order come with one silicone ring.
It is ideal for aftermarket chrome grips, or to increase the friction for your OEM
Go Cruise designs based on handlebar size, not grip size. There are two different size of handlebars on the market.
1. 7/8” handlebar (22mm) for sports bikes and urban bikes.
Or fit grips diameter from 1.18” ~1.34” (30 mm ~ 34 mm)
Or fit grips diameter from 1.38” ~ 1.53” (35 mm ~ 39 mm)
Or use electrical tape around 2-3 layers on the grip to increase the diameter up to 30mm, then put silicone rings top over electrical tape.
Yes, the large Go Cruise (for 1”bar) can fit on ISO grips perfectly.
Go cruise can fit on 99% stock OEM rubber grips, metal (chrome) grip as well.
Won't work on any aftermarket foam grip and 100% super soft silicone grips.
(It fits those covers that slip over your existing grips, such as Grip Puppies.)
For using on Grip Puppies we suggest 3 options.
1. The best way to do is to set Go Cruise on rubber grip first, then install
Grip Puppies.
2. Move Grip Puppies to the right to make room for silicone ring and Go Cruise (about 1/4" width), then install Go Cruise.
3. If you can not move the Grip Puppies to make room for Go Cruise.
Cut 1/4" Grip Puppies to make room for silicone ring and Go Cruise.
Sorry, It won’t work on D3 grips.
Because Go Cruise need 3/8” flat surface on left side of grip (need room for silicone ring)
D3 sports bike grips only have 1/4" flat surface, so you can’t use Go Cruise.
If you go cruise does not hold the speed after a few months, most likely because Go Cruise gets dirty from the ride. First remove Go Cruise and silicone ring, use soap and water to clean them, then put them back on the grip. Most of time will solve the problem.
Do not use any chemical to clean Go Cruise and silicone ring。
We warrants to the original purchaser that the throttle control is free of material and workmanship defects for one year from the date of purchase.
Some of KAWASAKI KLR 250/650 have dirt bike grips, the diameter size of the grip is less than 29mm. The only way to use Go Cruise on your bike is to use electrical tape go around the grip about 3 to 5 layers to increase diameter(up to 30mm), then put on silicon ring over.(silicone ring come with package). That should do the work.
Or we can refund your money.
Go Cruise is made of composite material which can work as low as 5°F (-15℃) and up to 167°F (75℃) strict environment..
...... for demostration purpose only
Always keep both hands on the handlebars...
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.