At Motorcycle Innovations we always look for products that are unique and innovative, and often stress Function over Form. With this in mind we carry many of the quality products from DK Custom that serve this purpose. We support two fundamental and functional aims when it comes to making your Harley Davidson last!
CLICK VIEW MORE!
FIRST - Cool Down your Ride!
These are the ways to do that!
Gas Tank Lift
Cooling Deflector Wings
Oil Filter Relocation
Permanent Oil Filter
Oil Cooler
SECOND - Smart Performance Mods
Combine the following mods on your H-D for Improved Performance You Can Feel!
Outlaw HiFlow Air Cleaner
External Breather System
Tuner
Free Flowing Exhaust(Modified Stock OR Aftermarket)
Thunder Torque Inserts™
Gas Tank Lift
Cooling Deflector Wings
Oil Filter Relocation Kit
Permanent Performance Oil Filter
Oil Cooler
Now..... on to the Cool-n-Clean Oil Filter Relocation Kit!
Finally, The Answer to an Easy, Mess Free Oil Change!
PLUS, Cooler oil helps engines last longer!
By relocating the oil filter, the filter is out in the wind, there is slightly more oil capacity, AND it's easy to remove the filter with No Mess!
The Cool-n-Clean Kit comes with everything needed to relocate your oil filter for easy oil changes and cooler oil.
The included adapter plates are Made in The USA. Precision CNC Cut by DK Custom from 6061 Billet aluminum.
You get the Black Powder Coat Finish.
See pictures, as this is the fully loaded top of the line option.... this is NOT the bare bones kits.
Quality Nickel plated brass hose fittings, along with USA Made Stainless Steel fasteners, blacked-out clamps and Black Braided hose.... are all included.
Installation is simple. If you have an existing OEM oil cooler, you don't even touch it during install. Simply remove the oil filter (not the housing that the oil filter screws onto that has the oil cooler lines), and relocate it back to under the passenger floorboard with the CnC Kit brackets and new Oil Filter Mount.
This Cool-n-Clean Oil Filter Relocation Kit was specifically designed to allow you to lean all the way over in a curve, still leaving plenty of clearance between the filter and the ground. Because of it being tucked tight and high, the left side passenger floorboard can only use the top and middle position.
Fitment: Fits all 2009-Up Harley Touring Models
Works with any oil filter that fits on your bike currently- OEM, K&N, Performance Cleanable, & others.
Cool-n-Clean Kit for 2009-Up HD Trikes available upon demand...... please email us.
We include these options in this kit:
Black Braided Fiber Hose
Black Hose Finishers
Black High Peformance Permanent Oil Filters
* Please Note: Using the Black Hose Finishers on the black BRAIDED hose is a Very TIght fit. Soaking the end of the hose in hot water will soften the rubber up, making it a little easier to slide on to the fitting.
Why did DK Custom build The Clean-n-Cool Remote Oil Filter Set-up?
Two Reasons:
1. They have tried dozens of ways to remove the oil filter without making a mess. Some work better than others, but none work well.
2. Twin Cams & M8's run too hot for their own good. A cooler engine runs stronger and lasts longer.
In their tests they saw that by simply relocating the oil filter, the oil temperature was consistently 8-10 degrees cooler. When DK added the exclusive Dual Cool Oil Cooler set-up to the CnC relocated Oil Filter, the oil temperatures were consistently 30-34 degrees cooler. We HIGHLY recommend added this Dual Cool Oil Cooler to this set up, although it is not mandatory.
You can see the Dual Cool oil cooler kit that they designed specifically for Twin-Cooled Twin Cam's & M8's at this LINK. (It also works as a great primary or "second" oil cooler on all air cooled Twin Cam's).
Patent Pending
***For those that really like to drag the hard parts thru the curves (or you might have aftermarket centerstands, etc.) and want to know how well tucked in these are-The following are the measurements:
All measurements were taken from the Center of the plastic cap that is labeled in the picture above.
1. The highest point of all parts of the bracket and filter are no higher than the center of the cap
2. The furthest any portion protrudes from the bike is 5.75" from the cap
3. The furthest back the oil filter goes is 4.5" from the center of the cap
4. The lowest point is 3.75" from the center of the cap
5. The furthest point forward is 1.5" from the center of the cap
"Finally a way to change my oil filter without making a mess! Plus my oil runs cooler. DK to the rescue again!"~Matt
