At 113 decibels, the distinct low-tone sound from the DENALI SoundBomb Mini Motorcycle Horn is twice as loud as a typical 100 decibel disc horn. Designed to be a direct Plug & Play upgrade from your factory horn, requiring no additional relay or wiring harness as long as the original horn has blade-style electrical connections and can handle the 5 amp load. When stock isn't quite enough, be heard with the SoundBomb Mini.
Some motorcycles horn circuits are not capable of powering this 5 amp horn. If your horn circuits' max amperage is less than 5 amps, or if you are unsure, simply add our plug-n-play harness to bypass the horn circuit and draw power directly from your battery.
113 Decibels at 3 feet
Operating voltage:12 Volts (11.7volts required)
Power draw: 5 Amps
Single piece design
Dimensions: Approximately 3.25" x 3.4" x 2.5"
Stylish all black design
Fits in most factory horn locations
Single piece electromagnetic horn
Fully illustrated Installation instructions
Fitment Note: Add our BMW wiring adapter (DNL.WHS.10100) for plug & play installation to BMW motorcycles.
Fitment Note: If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to connect to the Soundbomb Mini.
Fitment Note: This horn is not compatible with KTM 1190 & 1290 Motorcycles.
Simple & highly effective upgrade that I've made on several bikes over the last few years. (Honda, Triumph &Moto Guzzi). One of the few accessories that are still affordable!
Do note that you MUST use the flexi metal strips to connect the "trumpet" to the bike frame/old horn bolt location... otherwise it'll just pop, pop, pop!!!
Love this horn. Now people can hear me when I beep. Very very easy to install.
didn't get a chance to do a proper install yet, but was able to remove the original and plug in this Denali Sound Bomb... man its loud compared to the original horn!
I will not be able to install it in its original location but don't see a problem lengthening the wires using same types of clips and installing it elsewhere on the bike. I will send a picture once complete.
Easy to install ,much better than the original
It’s a lot louder than stock one. That’s great.
Stem on horn too short to mount on OEM bracket with existing rubber grommet.
After removing grommet, the horn would mount but rubbed on fender at full turn.
I ended up removing grommet and using the bracket which was included, bent it and it’s a good fit. Although I used locking nuts and hopefully won’t rattle off.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.